Make The Right Connections
Support Center > Knowledge base> Article: Setup of the 232BSS4 (buffered serial smart switch)

Setup of the 232BSS4 (buffered serial smart switch)

Article ID: 24558 Email Print

Brief Description
How do I configure the 232BSS4?

Solution/Troubleshooting

The User Manual for the 232BSS4 gives detailed instructions on setting up the 232BSS4.

To start: 

Remove cover and set jumper for setup mode

Use the software to set up the unit, save the settings to the 232BSS4 (see Manual for details)

Move setup jumper back to Run mode.

Put the cover back on and you are ready to go.

Note:  You must recycle power on the 232BSS4 every time you change the jumper


Related Documents

Article Details
Views:411 Created on:Nov 15, 2012
Posted in: Serial Switches
Tagged: 232BSS4


Poor Outstanding
Enter the numbers as shown in the image on the left