Enabling a Connected Planet
Support Center > Knowledge base> Article: Advantech ADAM 6000 Series Password Reset

Advantech ADAM 6000 Series Password Reset

Article ID: 27732 Email Print
Brief Description
How can I reset the ADAM 6000 Series password to the default?

Solution/Troubleshooting

The ADAM.Net Utility can reset the password on a module, it needs to have firmware 2.00 or greater installed.

1)    Find the module using the ADAM.Net Utility

2)    Go to the Password Tab

3)    Click the Reset Password button

4)    Within 10 seconds unplug the power from the module, then repower the module

5)    The password will be set to 00000000  (eight zeros)



Related Documents

Article Details
Views: 8081 Created on: Mar 13, 2013
Date updated: Mar 13, 2013
Posted in: Remote I/O

Poor Outstanding