Enabling a Connected Planet
Support Center > Knowledge base> Article: PEAP w/out certificate Airborne

PEAP w/out certificate Airborne

Article ID: 40277 Email Print
Brief Description
How do I configure PEAP without a certificate on my Aiborne unit?



PEAP Configuration Without A CA


  1. In the Configuration menu go to WLAN Security Settings.
  2. Go to Wireless LAN Security Type.
  3. Select PEAP.
  4. Go to EAP Identity.
  5. Enter the EAP username entered in the RADIUS server.
  6. Go to EAP Password.
  7. Enter the password used on the RADIUS server for the EAP Ident selected.
  8. Go to EAP Phase 1 String.
  9. Enter peaplabel=0
  10. Go to EAP Phase 2 String.
  11. Enter auth=MSCHAPV2
  12. Save the page and settings.
  13. Reboot the unit for the changes to take effect.


This configuration will only work if your network supports PEAP. You also have to make sure that the username is correct. If you are using Windows domains you will need to include them in the full username.

Related Documents

Article Details
Views: 1821 Created on: Dec 31, 2013
Date updated: Sep 19, 2017

Poor Outstanding